How to Do Permanent Jewelry: A Step-by-Step Guide for Beginners
By Jake Randolph, Founder of LINKED Permanent Jewelry Training. Updated November 2026.
Technique reviewed by Adel Cruz, Director of Education and Head Trainer.
To do permanent jewelry, you fit a chain to your client's wrist, ankle, or neck, cut it to size, and join the ends with a small jump ring. Then you close that jump ring with no gap, slide a leather patch under it, ground it, and weld the seam shut with a pulse arc micro welder while you and your client wear protective eyewear. The weld takes a split second, and the whole piece takes about 10 to 15 minutes.
That's the short version. We've trained 4,000+ students since 2022, online and at our studio near Orlando, so this guide walks you through a real appointment the way our trainers see it: what happens at each step, why it matters, how to keep you and your client safe, and the mistakes we catch most in class.
What this guide won't do is replace hands-on practice. The techniques behind each step (closing a jump ring perfectly, dialing in your welder, fixing a weld that goes wrong) are what our training is for. Exact welder settings aren't here either. They depend on your welder, the chain gauge, and the metal, so a number that's perfect on one machine can blow a jump ring on another. LINKED students get tested settings for the welder in their kit.
How to do permanent jewelry: the steps at a glance
- Check in your client. Get the waiver signed and ask a few safety questions.
- Choose the chain and metal together.
- Size it on the body where it will be worn.
- Cut the chain to length.
- Attach the jump ring that joins the two ends.
- Close it with zero gap.
- Set the leather patch and the ground.
- Weld the seam with eyewear on for both of you.
- Inspect and test the weld, then clean it up.
- Give the aftercare talk before your client leaves.
What you need before your first weld
Here's the core kit every permanent jewelry artist works from:
- A pulse arc micro welder with its stylus and tungsten electrodes. Not sure which one fits you? Our welder buyer's guide compares them.
- A ground: grounding pliers, grounding hemostats, or an alligator clip. Your welder won't fire without one.
- Protective eyewear with dark lenses, one pair for you and one for your client. Some welders also take an auto-darkening screen.
- A leather patch to sit between the jump ring and your client's skin.
- Chain in gold-filled, sterling silver, or 14k solid gold, plus jump rings to match.
- Pliers and cutters for handling jump rings and cutting chain.
- A tungsten sharpener, a fiberglass pen, and a jewelry cloth for cleanup.
- A client waiver and an aftercare card.
Every LINKED permanent jewelry starter kit includes the welder you choose, 20 ft of chain, jump rings, pliers and cutters, tungsten electrodes and a sharpener, an adjustable stylus stand, two pairs of protective eyewear, a leather patch, a fiberglass pen, and the full online course. You can also shop chain, charms, and tools on our permanent jewelry supplies page.

Set up a safe station first
Safety is the part beginners rush, and it's the part clients notice. Set it up the same way every time:
- Eyes: always wear protective eyewear. The weld makes a quick, very bright flash. Wear dark welding lenses, and put the second pair on your client. Clear glasses don't protect your eyes, so don't swap them in because it's hard to see the ring. Better light and magnification fix that problem.
- Skin: the weld happens on the jump ring, not on your client. The leather patch goes under the ring every single time.
- Ground: attach the ground before you weld. It's what makes the weld work, and it protects you and your client. A loose or poorly fitting ground is one of the most common causes of bad welds.
- Argon: it's optional. Every welder we sell accepts argon, but none require it. It can reduce firescale (the discoloration around a weld), and our team often welds without it. If you use it outdoors, the wind blows it around, so work under a canopy or with your back to the wind.
- Your space: a well-ventilated space with bright light, a stable table, and power you can count on. At events without an outlet, our team runs welders on a Jackery 300 portable power station.
Step by step: your first permanent bracelet appointment
1. Check in your client
Before any chain comes out, have your client sign a waiver. A basic one covers consent to the welding process, an understanding that the piece is meant to stay on, and a note about skin sensitivities. LINKED students get a waiver template in the course.
Then ask a few quick questions:
- Any upcoming surgery, MRI, or X-ray? Many facilities ask patients to remove jewelry. That's fine: it can be snipped off at the jump ring and rewelded later, but your client should know that up front.
- Any metal sensitivities? Note it on the waiver and have your client choose a metal they already wear without any issues. If they aren't sure how their skin reacts, skip the weld for now. 14k gold-filled, solid gold, and stainless steel are usually the best-tolerated options.
- Is the client a minor? Check your state and local rules, and get a parent or guardian's consent before you weld. We also recommend reviewing CPSIA guidance with your attorney.
Pacemaker or other implanted medical device? Don't weld on a client with a pacemaker or other implanted medical device unless their doctor has cleared them. When in doubt, skip the weld.
2. Choose the chain and metal together
This is the fun part, and it often takes longer than the weld. Walk your client through the metals:
- 14k gold-filled: a thick layer of real gold bonded to a base core. The best value for most clients. It can potentially last 8 to 15 years with proper care.
- Sterling silver: affordable, and it can potentially last 8 to 15 years with proper care. It can tarnish a little but cleans up easily.
- 14k solid gold: the premium option that lasts for life.
- Stainless steel (PVD or ion-plated): durable and budget-friendly. It needs a different jump ring so the piece has a safe breaking point. That's covered in training.
Skip gold-plated chain for permanent pieces, since it tarnishes and can irritate skin. Which chain styles work best for rings, anklets, and necklaces is part of what we teach.
3. Size it on the body
Size on the actual wrist, ankle, or neck, not with a tape measure and a guess, and ask your client how it feels before you cut. A good rule of thumb is about one finger of slack: enough to move and sit comfortably, without sliding far down the hand. Getting the fit just right on every body type is something we practice hands-on in training.
4. Cut the chain
Once the fit is right, the chain is cut to length. Check the fit twice before you cut: you can't add length back without another jump ring.
5. Attach the jump ring
A jump ring is the tiny ring that joins the two ends of the chain, and it's the only part of the piece that gets welded. It has to match the chain, so every chain listing on our site shows its suggested jump ring size.
Opening and closing a jump ring without bending it out of shape looks simple and takes real practice. It's one of the first hands-on skills our students learn, long before they fire a welder.
6. Close it with zero gap
The jump ring has to close completely, with the two ends meeting flush and no gap you can see from any angle. This is the single biggest quality point in permanent jewelry: a gap is what causes most blown welds. In class, a trainer checks your closures until zero gap becomes automatic.
7. Set the leather patch and the ground
The leather patch goes under the jump ring, between the metal and your client's skin. Then the piece is grounded. The ground completes the circuit, and the welder won't fire without it. Make sure whatever you use fits snugly, because a loose ground leads to bad welds.
8. Weld the seam
Before you fire, run the safety check: eyewear on for both of you, the ground attached, and the leather patch in place under the weld spot. Beginners skip this check more than any other. Then the welder fuses the seam of the jump ring closed. You'll see a quick flash, and that's it.
About settings: pulse arc welders pair power (in joules) with duration (in milliseconds). The right combination depends on your welder, the jump ring, and the metal, so there's no universal number. LINKED students get tested settings for their kit's welder in our student community, so they aren't guessing on a client's wrist.
9. Inspect and test the weld
Look at the weld up close, in good light. A good weld turns the jump ring into one smooth, continuous loop: the seam is fused all the way across, with no gap, no hole, and no missing metal. A blown weld is easy to spot, because part of the ring is gone. Before your client leaves, give the chain a gentle tug or a gentle twist at the jump ring to make sure it holds.
Then clean up the weld and give the piece a quick polish with your jewelry cloth.
10. Give the aftercare talk
This takes one minute and saves you a lot of messages later. Tell your client:
- Wash it with mild dish soap and water every 1 to 2 weeks, and use a polishing cloth on sterling silver.
- If they ever need it removed for a procedure, snip it at the jump ring and keep the chain. It can be rewelded.
- What your guarantee covers. Many artists guarantee the weld for 30 days, 6 months, or lifetime, with a separate, shorter chain warranty.
Want the client's side of all this? Send them our guide to what permanent jewelry is and how it works.
Beginner mistakes our trainers catch most
These come straight from the questions our support team answers every week. Every one of them is fixable, and spotting which one went wrong is a big part of what students learn in training.
| Mistake | What happens |
|---|---|
| A gap in the jump ring | A big spark and a blown weld with part of the ring missing |
| A loose or missing ground | The welder won't fire, or the weld is weak |
| Skipping welder maintenance | Welds get weaker and less consistent |
| Guessing at settings | Welds swing between too weak and blown |
| The wrong jump ring for the chain | It won't thread, or it bends out of shape |
| Using practice jump rings on clients | Poor welds on a paying client |
| Clear glasses instead of dark lenses | Your eyes aren't protected from the flash |
| Cutting before checking the fit | A bracelet that's too tight or too short |
Reading a list like this helps you know what to watch for. Having a trainer look at your weld and tell you exactly what went wrong, and how to fix it, is what makes it stick.
How long does it take to learn permanent jewelry?
Less time than most people expect. LINKED's online course is 21 self-paced modules, about 7 to 8 hours of video, covering welding, machine settings and maintenance, metals, tools, safety, argon, sizing and slack, troubleshooting, and the business side. Some students finish it in a few weeks and others take a few months. Our in-person training near Orlando is one full day, 9:00 AM to 5:00 PM, where you weld jump rings and put jewelry on other students or LINKED staff.
Many students are ready to take clients right after hands-on training, with practice. The appointment itself takes about 10 to 15 minutes per piece, and you'll be slower at first. That's normal, and you get quicker every time.
How to practice before your first client
- Start with the motions. The practice jump rings in a starter kit are for getting comfortable with your tools, not for great welds. Don't worry when those welds look rough.
- Then practice real welds on sterling silver and gold-filled jump rings, the same metals you'll use on clients.
- Weld on a table first, then on a wrist. Friends and family make great first clients, and they'll happily wear your practice pieces.
- Get your welds checked. LINKED students send 3 close-up photos or a short video of their welds to our team for review, and that review is the step to earn their certificate.
- Practice the whole appointment, not just the weld: waiver, chain choice, sizing, weld, aftercare. Speed comes from the routine.
When are you ready to charge clients?
You're ready when you can check every box here:
- You close jump rings with no gap, every time, without thinking about it.
- Your welds come out smooth and consistent, and they hold when you test them.
- You know your settings for every chain and metal you carry.
- You can set up your station, with ground, leather patch, and eyewear, in a few minutes.
- You've fitted pieces on a few different people, not just yourself.
- Your waiver, aftercare card, and prices are ready.
Once your technique is solid, permanent jewelry can be a profitable service, since each piece takes minutes and charms and connectors add to every sale. For pricing, licensing, and booking your first events, read how to start a permanent jewelry business. For the full career path and costs, see how to become a permanent jewelry artist.
What a free video can't give you
You can find the basic steps for free, on YouTube and from welder brands. What a video can't do is check your work, answer your questions, or help you turn a new skill into a business. That's what you get as a LINKED student:
- Feedback on your welds. Send our team photos or a short video of your welds and we'll tell you what to fix.
- Support when something goes wrong. Call or text our team, and use the tested welder settings we share for your machine.
- Coaching call replays and ongoing bonus training, so you keep learning after the course.
- A community of artists. Our students-only Skool community and private Facebook group, where you can ask questions and share your wins.
- Done-for-you marketing materials: social media images, videos, and post wording you can use to promote your business from day one.
- Business templates, including a sample client waiver, so you're not starting your paperwork from scratch.
- Business education, not just welding: pricing, events, and building your client list.
- A lifetime 10% student discount on supply orders over $50.
Learn it hands-on with LINKED
Reading about the steps is a great start. Doing them with a trainer in your corner is how you get confident fast. At in-person training, you get:
- Personal, hands-on instruction from experienced trainers who have taught thousands of students.
- A real training environment, where you practice on actual wrists before you ever work on a paying client.
- Immediate feedback. A trainer watches your welds, tells you what went wrong, and helps you fix it on the spot.
- Confidence before your first client, because you've already done the whole appointment start to finish.
There are two ways to train with us:
- Online training kits: your choice of four beginner-friendly welders (the LINKED Luxe is our most popular), 20 ft of chain, the tools, and the full course, with lifetime access. See the permanent jewelry starter kits.
- In-person training: a full hands-on day at our studio in Winter Garden, near Orlando. Already own a welder? You can take the training on its own. See all permanent jewelry training options.
Not sure where to start? Book a call with our team, or call or text us at (321) 515-5505. We'll help you pick the right kit and training for you. 🤍
How to do permanent jewelry: FAQ
Can you do permanent jewelry without a welder?
Not true permanent jewelry. Some connectors lock or crimp closed without welding, but they aren't welded, and they aren't what clients book a permanent jewelry appointment for. A professional piece is closed with a pulse arc micro welder.
How long does it take to learn permanent jewelry?
LINKED's online course is about 7 to 8 hours of video across 21 modules, and in-person training is one full day. Many students are ready to take clients right after hands-on training, with practice.
Do you need a license to do permanent jewelry?
It depends on your state, county, and city, so check with your local licensing office and a CPA. You don't need a bloodborne pathogen certification to take LINKED's training, and safety is covered in the course.
What welder do you need for permanent jewelry?
You need a pulse arc micro welder. All four welders LINKED sells are beginner friendly, and the LINKED Luxe is our most popular. Our welder buyer's guide compares them.
What size jump ring should I use?
It depends on the chain. Every chain listing on our site shows its suggested jump ring size, and matching jump rings to chain is covered in our training.
Do you need argon gas for permanent jewelry?
No. Argon is optional. It can reduce firescale, but our team often welds without it. Every welder we sell accepts argon, and none require it.
Why did my permanent jewelry weld blow out?
The most common cause is a gap in the jump ring. Learning to read a weld, figure out what went wrong, and fix it is a core part of LINKED's training.
Can you weld stainless steel permanent jewelry chain?
Yes, but not to itself. Stainless chain needs a different jump ring so the piece has a safe breaking point, and we cover how in training.
Does the weld hurt the client?
Most clients feel little or nothing when it's done correctly with the leather patch. The weld is on the jump ring, not the skin, and the flash lasts a split second. You and your client both wear protective eyewear.
About the author
Jake Randolph is the founder of LINKED Permanent Jewelry Training. Since 2022, LINKED has trained 4,000+ students online and at its studio in Winter Garden, Florida, near Orlando, and supplies working artists with chain, charms, jump rings, tools, and welders.